Panasonic WV-ST165 Operating Instructions - Page 159

15 Configure the settings relating to the authentication [User mng.] The description below is the configuration of the priority stream that can transmit images without deteriorating the image quality and refresh interval even when multiple users access concurrently. Priority stream [Activation] Select "On" or "Off" to determine whether or not to use the priority stream. • Default: Off Note • When "On" is selected for "Activation" of "Priority stream", number of users who can access the camera may be limited. [Destination IP address(1)] Enter the first destination IP address. [Destination IP address(2)] Enter the second destination IP address. [Stream type] Select either "JPEG", "H.264/MPEG-4(1)" or "H.264/MPEG-4(2)". • JPEG: JPEG images will be transmitted. • H.264/MPEG-4(1): H.264(1) (or MPEG-4(1)) images will be transmitted. • H.264/MPEG-4(2): H.264(2) (or MPEG-4(2)) images will be transmitted. • Default: JPEG Note • When "Best effort" is selected for "Transmission priority" of "H.264 (MPEG-4)", bit rate will vary between the maximum and minimum rates while images are being transmitted. SW396 SW395 SC386 SC385 SC384 SW175 SW172 ST165 ST162 : • When "H.264" is selected for "Recording format", it is impossible to transmit H.264(2) images. In this case, "H.264/MPEG-4(2)" is invalidated. [Refresh interval*] Select the refresh interval from the following. This setting is validated only when "JPEG" is selected for "Stream type". SW395 SC385 0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps/ 10fps/ 12fps*/ 15fps*/ 30fps* Operating Instructions 159