Panasonic WV-ST165 Operating Instructions - Page 129
Con the settings relating to audio [Audio
![]() |
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
11 Configure the settings relating to images and audio [Image/Audio] 11.7 Configure the settings relating to audio [Audio] Click the [Audio] tab on the "Image/Audio" page. (®page 47, page 49) The settings relating to audio can be configured on this page. Note • • Images and audio will not be synchronized. Therefore, images and audio may not always match. Audio may be interrupted depending on the network environment. SSWW339966 SW395 SC386 SC385 SC384 SW175 SW174W SW172 ST165 ST162 [Audio transmission/reception] Select the communication mode used for audio data transmission/reception between the camera and the PC from the following. • Off: Does not receive/transmit audio between the camera and the PC. Therefore, the settings and controls relating to audio will be invalidated. • Mic input: The PC receives audio data from the camera. Audio can be heard with images on the PC. Images and audio will not be synchronized. • Audio output: Audio data from the PC will be transmitted to the camera. Audio can be heard from the speaker connected to the camera. • Interactive(Half-duplex): Both reception and transmission are available. However, audio data cannot simultaneously be transmitted and received. • Interactive(Full-duplex): Both reception and transmission are simultaneously available. • Default: Off Note • • Howling may be generated depending on usage conditions. If howling is generated, prevent sound generated by the PC from entering the PC microphone. When "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab of the "Image/Audio" page, audio transmission will become unavailable while monitoring H.264 (or MPEG-4) images. To transmit audio from a PC to the camera, click the [JPEG] button on the "Live" page. [Audio encoding format] Select the audio encoding format from G.726 and G.711. • Default: G.726 Note • • The other i-PRO series products do not support "G.711" unless otherwise stated. (As of August, 2011) G.711 is available only when "Mic input" is selected for "Audio transmission/reception". Operating Instructions 129
![](/manual_guide/products/panasonic-wvst165-operating-instructions-6b72a96/129.png)