Panasonic WV-ST165 Operating Instructions - Page 163
Con the settings relating to the NTP server [NTP
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
16 Configure the settings of the servers [Server] [FTP server address] Enter the IP address or the host name of the FTP server. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). IMPORTANT • When entering the host name for "FTP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network" page. (®page 166) [User name] Enter the user name (login name) to access the FTP server. • Available number of characters: 1 - 32 characters • Unavailable characters Password] Enter the password to access the FTP server. • Available number of characters: 0 - 32 characters • Unavailable characters: " & [Control port] Enter a control port number to be used for the FTP server. • Available port number: 1-65535 • Default: 21 The following port numbers are unavailable since they are already in use. 20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670 [FTP mode] Select "Passive" or "Active" for the FTP mode. Normally, select "Passive". When it is impossible to connect after select "Passive", try to connect after selecting "Active". • Default: Passive 16.3 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the "Server" page. (®page 47, page 49) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. Operating Instructions 163