Panasonic WV-ST165 Operating Instructions - Page 134
Con the alarm settings [Alarm]
![]() |
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
13 Configure the alarm settings [Alarm] 13 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the VMD area settings, and the alarm occurrence notification can be configured on this page. The "Alarm" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] tab. 13.1 Configure the settings relating to the alarm action [Alarm] Click the [Alarm] tab on the "Alarm" page. (®page 47, page 49) The settings relating to the alarm can be configured in this section. Refer to page 138 and page 141 for further information about the settings relating to the alarm images and the alarm output terminal. Alarm [Terminal 1] Determine how to use terminal 1. • Off: Not used. • Alarm input: Receives alarms. - Close SW175 SW174W SW172 ST165 ST162 : An alarm is detected when the terminal status is changed to "On". - Open SW175 SW174W SW172 ST165 ST162 : An alarm is detected when the terminal status is changed to "Off". • Black & white input: Receives the black & white switchover input. (When the input is set to On, the black & white mode is activated.) SW396 SW395 SC386 SC385 • Default: Off [Terminal 2] Determine how to use terminal 2. • Off: Not used. • Alarm input: Receives alarms. - Close SW175 SW174W SW172 is changed to "On". ST165 ST162 : An alarm is detected when the terminal status 134 Operating Instructions
![](/manual_guide/products/panasonic-wvst165-operating-instructions-6b72a96/134.png)