Panasonic WV-ST165 Operating Instructions - Page 196
When using “Dynamic DNS Update(DHCP)”, 17.5 Con the settings relating to SNMP [SNMP]
![]() |
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
17 Configuring the network settings [Network] 17.4.6 When using "Dynamic DNS Update(DHCP)" [Host name] Enter the host name to be used for the Dynamic DNS Update service. • Available number of characters: 3 - 250 characters Enter in the form of "(host name). (domain name)". • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). • Default: None (blank) Note • Refer to the network administrator for further information about the available host names. 17.5 Configure the settings relating to SNMP [SNMP] Click the [SNMP] tab on the "Network" page. (®page 47, page 49) The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by connecting to the SNMP manager. When using the SNMP function, contact the network administrator. [Community] Enter the community name to be monitored. • Available number of characters: 0 - 32 characters • Default: None (blank) IMPORTANT • When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work. [System name] Enter a system name to be used to manage the camera with the SNMP function. 196 Operating Instructions
![](/manual_guide/products/panasonic-wvst165-operating-instructions-6b72a96/196.png)