Panasonic WV-ST165 Operating Instructions - Page 136

13 Configure the alarm settings [Alarm] 13.2 Configure the settings relating to the camera action on alarm occurrence [Alarm] Click the [Alarm] tab on the "Alarm" page. (®page 47, page 49) The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 134, 138 and 141 for further information about the settings relating to the alarm, the alarm image and the alarm output terminal. Camera action on alarm [Terminal alarm 1] Select an action to be taken when a terminal alarm 1 is detected from the following. • Off: Does not take any action even when a terminal alarm 1 is detected. • 1-64 SW395 SC385 SC384 SW175 SW174W SW172 ST165 ST162 : When the registered preset position is selected, the camera will move to the selected preset position when a terminal alarm 1 is detected. • Auto track SW395 SC385 : When a terminal alarm 1 is detected, the camera will start the auto tracking. • 1-256 SW396 SC386 : If a previously registered preset position is selected, when a terminal alarm 1 is detected, the camera will move to that position. • Auto track SW396 SC386 : When a terminal alarm 1 is detected, the camera will start the auto tracking. • Patrol 1 SW396 SC386 : When a terminal alarm 1 is detected, the camera will start the patrol. * If Patrol 1 is not registered it is not displayed on the screen. • Default: Off [Terminal alarm 2] Select an action to be taken when a terminal alarm 2 is detected from the following. • Off: Does not take any action even when a terminal alarm 2 is detected. 136 Operating Instructions