Panasonic WV-ST165 Operating Instructions - Page 158
Con the settings relating to the priority stream [System
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
15 Configure the settings relating to the authentication [User mng.] The restriction settings of PCs (IP address) from accessing the camera can be configured on this page. [Host auth.] Select "On" or "Off" to determine whether or not to authenticate the host. • Default: Off [IP address] Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP address. Note • • When "IP address/subnet mask" is entered, it is possible to restrict PCs in each subnet. For example, when "192.168.0.1/24" is entered and "2. Camera control" is selected for the access level, the PCs whose IP address is between "192.168.0.1" - "192.168.0.254" can access the camera with the access level "2. Camera control". When the IP address already in use is entered and the [Set] button is clicked, the respective host information will be overwritten. [Access level] Select the access level of the host from the following. 1. Administrator/ 2. Camera control/ 3. Live only Refer to page 156 for further information about the access level. • Default: 3. Live only [Host check] From the pull-down menu of "Host check", the registered host can be selected and the selected host's IP address can be checked. The registered IP address will be displayed with the access level. (Example: 192.168.0.21 [1]) To delete the registered host, click the [Delete] button after selecting the IP address to be deleted. 15.3 Configure the settings relating to the priority stream [System] Note • SW175/SW174W/SW172/ST165/ST162 do not support MPEG-4. Click the [System] tab on the "User mng." page. (®page 47, page 49) 158 Operating Instructions