Panasonic WV-ST165 Operating Instructions - Page 147
Configuration of the settings relating to the mail notification [Notification], Mail notification
![]() |
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
13 Configure the alarm settings [Alarm] 4. To invalidate the VMD area, click the [Set] button after selecting "Off" for "Status" of the VMD area to be invalidated. → The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated, no alarm will occur even when a motion can be recognized in the area. 5. To delete the VMD area, click the [Delete] button corresponding to the area to be deleted. → The outline of the respective VMD area will disappear. 6. Click the [Set] button. → The edited settings will be applied. 7. Click the [Back] button to return to the screen to select a preset position. 13.8 Configuration of the settings relating to the mail notification [Notification] Click the [Notification] tab on the "Alarm" page. (®page 47, page 49) The settings relating to the alarm mail can be configured. It is necessary to configure the settings of the mail server to perform the mail notification. (®page 161) Mail notification [Mail server >>] When "Mail server >>" is clicked, the [Mail] tab of the "Server" page will be displayed. (®page 161) [Mail notification] Select "On" or "Off" to determine whether or not to provide notification by e-mail according to the settings for the "Alarm" and "Diag." checkboxes of "Destination of notification" below. - When an alarm is detected ("Alarm") SW396 SW395 SC386 SC385 SC384 SW175 SW172 ST165 ST162 : Operating Instructions 147
![](/manual_guide/products/panasonic-wvst165-operating-instructions-6b72a96/147.png)