Panasonic WV-ST165 Operating Instructions - Page 225
Con the network settings of the camera using the Panasonic “IP Setting Software
View all Panasonic WV-ST165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
21 Using the CD-ROM 21.5 Configure the network settings of the camera using the Panasonic "IP Setting Software" It is possible to perform the network settings of the camera using the "IP Setting Software" on the provided CD-ROM. When using multiple cameras, it is necessary to configure the network settings of each camera independently. If the Panasonic "IP Setting Software" does not work, configure the network settings of the camera and the PC individually on the "Network" page of the setup menu. (®page 166) IMPORTANT • When using Windows 7 or Windows Vista, the "Windows Security Alert" window may be displayed when starting the "IP Setting Software". In this case, disable "User Account Control" from the control panel. • Panasonic "IP Setting Software" is inoperable in other subnets via the same router. • This camera cannot be displayed or set with an older version of the "IP Setting Software" (version 2.xx). SW396 SW395 SC386 SC385 SC384 : • For the security enhancement, the MAC address/IP address of the camera to be configured will not be displayed when around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to "20min" in the IP setup.) However cameras in the initial set mode are still displayed even after 20 minutes. SW175 SW174W SW172 ST165 ST162 : • For the security enhancement, the "Network Settings" will not be able to be performed when around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to "20min" in the IP setup.) 1. To start the Panasonic "IP Setting Software", click the [Run] button next to [IP Setting Software] from the CD launcher menu window, or double-click on the shortcut icon created after installing the software on the PC. • The License Agreement will be displayed. Read the Agreement and choose "I accept the terms in the license agreement", and click [OK]. 2. Click the [Network Settings] button after selecting the MAC address/IP address of the camera to be configured. Note • • When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Search] button of the "IP Setting Software". When a duplicate IP address is used, the corresponding camera number will be displayed shaded. Operating Instructions 225