Pfaff creative 4874 Owner's Manual - Page 138
Cleaning of the machine, Turn off the power switch, Oiling the machine, Removing the needle plate,
View all Pfaff creative 4874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Note: Remove the threads before changing the needle plate. Removing the needle plate Turn off the power switch Raise the presser foot and bring the needles to their highest position. Remove the presser foot and open the swivelling 38 table. Press the needle plate disconnection lever (38) downward. The needle plate can be removed to the left. Placing the needle plate Put on the needle plate in the back first on to the guide pin A and press the needle plate downward in the front until it snaps in place. A Cleaning of the machine Turn off the power switch Remove the top cover hook or decorative thread guides. Remove the trim catcher, open the front cover and the swivel table. Disengage the upper knife. Remove the presser foot and the needle plate. With the lint brush provided in the accessory box, remove lint from the upper and lower knives, the differential feed and the looper area. Oiling the machine Turn off the power switch Bring the upper looper to its highest position by turning the hand wheel. After every cleaning of the machine, oil the points shown with the oil included in the accessories. One or two drops of PFAFF sewing machine oil are sufficient. All other parts are made from special materials and do not need to be oiled. 9-2