Pfaff creative 4874 Owner's Manual - Page 67
Edge guide
View all Pfaff creative 4874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Now turn the hand wheel back until the needles are in their highest position. At the same time, loosen the needle threads slightly with one finger. Cover stitch Raise the presser foot. Grasp the threads at the end of the seam and press the tension release button to pull the project out. Cut the threads off. Pull the needle threads through to the wrong side of the fabric and tie off. Edge guide A Slide the edge guide from the accessory box left to right into guide A of the presser foot holder. You can adjust the ruler as you wish by sliding it in the guide. The edge guide is used for sewing seams at a constant distance from the edge of a project. It can also be used programs 21-30. To return your creative 4874 to normal sewing: Open the front cover and take off the sewing table. Push the upper looper lever to the right so that the upper looper is engaged. Return the stitch finger to its upright and engage the movable knife. Replace the knife guard onto the front cover, and close the cover. 4-9