Pfaff creative 4874 Owner's Manual - Page 73
Top/deco switch lever, Stitch program selection
View all Pfaff creative 4874 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Top Cover Stitch Top/deco switch lever Note: If the top/deco switch Choose a stitch program and move the top/ deco switch lever A to the correct position: lever is not in the correct position, the machine will not run in programs 21 - 30 and an Right for top cover, programs 21, 22 and alarm will sound. 23. A Left for deco cover, programs 24 - 30. For our example, we have chosen program 23. Stitch program selection Switch the machine on and select one of the top cover programs with the program selection buttons +/- (11). The stitch length and differential feed will be adjusted and the sewing speed will be slowed automatically. For our example, we have selected program 23, 3-needle, 4-thread top cover. If you hear an alarm when you make your stitch program selection, this means that the top/deco switch lever (A) is in the wrong position. Note: Always set up your creative 4874 as shown in the display first. Then open the program memory (see page 3-5) before threading the machine. 3.0 1.0 The stitch length and the differential feed are set automatically, but can be altered and stored individually (see page 3-4). 0 1L 2 1R 2 With the needle changing tool, insert needles L 0, 1 and 2 as far as they will go into the needle holder (make sure the needles are inserted all the way with your fingers). Tighten the associated retaining screw and remove the needle changing tool. 5-3