Pfaff creative 4874 Owner's Manual - Page 49

Type of fabric / effect, Very light fabrics, Normal fabrics, Light knitwear, Heavy knitwear, Stretch

Page 49 highlights

Technical section, general If you set the differential feed to 2.0 the front feed dog moves at twice the speed of the rear feed dog. This means that the front feed dog moves twice as much fabric as the rear feed dog. This gathers the fabric. In this way, you can prevent the seam from stretching when you work with knits A such as jersey or cable knits. The seam will remain flat (A). However, you can also use it to achieve fashionable effects such as the gathered effect with very fine fabrics (B). B The following table includes notes on setting the differential feed. Always test your setting first on a piece of scrap fabric. Type of fabric / effect Very light fabrics: silk, satin, poplin, taffeta, linings. Normal fabrics: light and medium-heavy cottons, fine cords, thermalwear Light knitwear: jerseys, polo fabrics, cut-pile pullovers, tricot, fine knitwear and gathered fabrics. Heavy knitwear: sweatshirt fleece, heavy gathered fabrics, heavy knitwear Stretch "lettuce edge" effect: medium and light knitwear, jerseys, knitwear, ruffled sleeve and collar edges, skirt hems, dense stitch lengths. Gathering: ruffling light fabrics and lace, seam allowances for curves, arches on blouses, shirts, round pockets, flaps, stretching or gentle ruffling of sleeves, sleeve widths for cuffs or gathered fabrics. Differential feed setting gather normal • • • • • stretch • • • 2-35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

2-35
Technical section, general
If you set the differential feed to 2.0 the
front feed dog moves at twice the speed
of the rear feed dog. This means that the
front feed dog moves twice as much fabric
as the rear feed dog. This gathers the
fabric.
In this way, you can prevent the seam
from stretching when you work with knits
such as jersey or cable knits. The seam will
remain flat (A).
However, you can also use it to achieve
fashionable effects such as the gathered
effect with very fine fabrics (B).
The following table includes notes on setting the differential feed. Always test your
setting first on a piece of scrap fabric.
Type of fabric / effect
Differential feed setting
gather
<2>
<1,5>
normal
<1>
stretch
<0,5>
Very light fabrics:
silk, satin, poplin, taffeta, linings.
Normal fabrics:
light and medium-heavy cottons, fine cords, thermal-
wear
Light knitwear:
jerseys, polo fabrics, cut-pile pullovers, tricot, fine
knitwear and gathered fabrics.
Heavy knitwear:
sweatshirt fleece, heavy gathered fabrics, heavy
knitwear
Stretch “lettuce edge” effect:
medium and light knitwear, jerseys,
knitwear, ruffled sleeve and collar edges, skirt hems, dense stitch
lengths.
Gathering:
ruffling light fabrics and lace, seam allowances for curves,
arches on blouses, shirts, round pockets, flaps, stretching or gentle
ruffling of sleeves, sleeve widths for cuffs or gathered fabrics.
B
A