Pfaff creative 4874 Owner's Manual - Page 83

Stopping sewing

Page 83 highlights

Stopping sewing 1. If you are sewing to the edge of the project: Grasp the threads at the end of the seam and sew slowly off the project. As you do so, pull the threads gently backwards. Top Cover Stitch 2. If you are sewing a continuous hem (around a project): Sew 4-5 stitches over the previous stitches. On the last stitch, turn the hand wheel towards you slowly until the needles reach their lowest position. Now turn the hand wheel back until the needles are in their highest position. At the same time, loosen the needle threads slightly with one finger. Raise the presser foot. Grasp the threads at the end of the seam and press the tension release button to pull the work piece out. Cut the threads off. Pull the top cover threads through to the wrong side of the fabric and tie off. 5-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

5-13
Top Cover Stitch
Stopping sewing
1.
If you are sewing to the edge of the
project:
Grasp the threads at the end of the
seam and sew slowly off the project.
As you do so, pull the threads gently
backwards.
2.
If you are sewing
a continuous hem
(around a project):
Sew 4–5 stitches over the previous
stitches. On the last stitch, turn the
hand wheel towards you slowly until
the needles reach their lowest position.
Now turn the hand wheel back until
the needles are in their highest
position. At the same time, loosen the
needle threads slightly with one finger.
Raise the presser foot. Grasp the threads at
the end of the seam and press the tension
release button to pull the work piece out.
Cut the threads off. Pull the top cover
threads through to the wrong side of the
fabric and tie off.