Pfaff creative icon User Guide - Page 124

Embroidery Edit Smart Toolbox on Embroidery Area The Smart Toolbox is available in the sewing and embroidery area. Touch & hold anywhere in your work area to open the Smart Toolbox and select the option you want. The options included in the Smart Toolbox differs depending on where it is used. Examples of options are Reset Toolbar, Open Help Center and Move Into Hoop. Move Into Hoop A red frame will surround the embroidery area if a design is placed outside the hoop area. Select Move Into Hoop to move any design that is outside the hoop area into the hoop area. The design will be placed at the outermost edge of the hoop. Tip: If you want to place a design e.g. in the top left corner as near as possible easily, touch and drag your design to the top left corner. Make sure that the design is placed outside the hoop area. Touch Move into Hoop and the design will be placed at the top left corner of the hoop area, as close to the hoop edge as possible. Grid On/Off Use the grid as a guide when you combine or place designs. You can set the distance between the grid lines in millimeter or inch by entering a number in the keypad. Touch to open Hoop Options and activate/deactivate grid. Note: Touch & hold on the Embroidery Area to open the Smart Toolbox and select Grid On/Off. Delete All Select to delete all loaded designs from the embroidery area. Touch OK in the pop-up message to confirm. Read about Embroidery Edit Select to open the User's Guide to read about the Embroidery Edit. Reset Toolbar Select if you want to reset your Toolbar to default. Read about customizing your work area. 124