Pfaff creative icon User Guide - Page 59
Settings, Sewing Settings
![]() |
View all Pfaff creative icon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
The Multi-Touch Screen Settings Here you will find tabs for Sewing Settings, Embroidery Settings, Machine Settings etc. Just swipe between the tabs and make settings for your creative icon™ machine. Sewing Settings There are two ways to change your settings; 1. Default Settings: Settings made in Default Settings will be saved, even when turning your machine off. The Default Settings becomes active when you start a new session or restart your machine. 2. Temporary Settings: Settings made in Temporary Settings will be reset at the start of a new project in Help Center or start of a new sewing session. When turning your machine off, all changes made in Temporary Settings will be reset to default. ActivStitch™ Technology When the ActivStitch™ technology feature is selected your machine will automatically choose the best way to control the upper thread, by thread metering or thread tension, based on your selected stitch and settings. Thread metering automatically and continuously measures the fabric thickness to meter the correct amount of thread for the selected stitch. When using thread tension, the tension discs will keep the correct amount of tension on the upper thread. For best results we recommend you keep this setting selected except when using specific accessories or special techniques that do not support thread metering. Deselect the ActivStitch™ technology feature in the Temporary Settings to switch to thread tension. The control for adjusting thread metering/thread tension , will change depending on the active stitch and whether the ActivStitch™ technology feature is selected or not in Temporary Settings. Read about ActivStitch™ technology in the Sewing chapter. 1. Default Settings in white colored check boxes 2. Temporary Settings in orange colored check boxes Automatic Presser Foot Lift When selected, the machine automatically raises the presser foot in the following situations: • When stopping with the needle in the down position the presser foot will automatically raise to pivot height. • After a thread cut the presser foot will be raised to lift position. When deselected, the presser foot will stay lowered, even if the machine stops with the needle in down position. 59
![](/manual_guide/products/pfaff-creative-icon-user-guide-ec822a4/59.png)