Pfaff creative icon User Guide - Page 26

3 Preparations Unpacking Machine and Embroidery Unit After lifting the machine out of the box and removing all packing material and the plastic bag, wipe the machine, particularly around the needle and needle plate to remove any oil before sewing. When unpacking the embroidery unit, do not throw away the black styrofoam inside the embroidery unit carrying bag, as this is designed for storing the embroidery unit when not in use. Note: Your creative icon™ machine is adjusted to provide the best stitch result at normal room temperature. Extreme hot and cold temperatures can affect the sewn results. When removing the embroidery unit from the box for the first time, be sure to remove the shipping brace (A) on the underside of the embroidery unit. A Preparations Connect the Power Cord and Foot Control Among the accessories you will find the power cord and the foot control. Note: Before plugging in the foot control, check to ensure that it is type "FR5" (see underside of foot control). 1. Pull out the cord from the foot control. Connect the foot control cord to the front socket on the bottom right side of the machine. 2. Connect the power cord to the rear socket on the bottom right side of the machine. Plug the cord into the wall socket. 3. Press the ON/OFF switch to "I" to turn on power and light. For the USA and Canada This sewing machine has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. 3 2 1 26