Pfaff creative icon User Guide - Page 52

Connect the Embroidery Unit 1. Slide the accessory tray off. 2. Slide the embroidery unit onto the free arm of the machine until it plugs firmly into the socket at the back of the machine. If needed, use the level adjusting feet so that the machine and embroidery unit are even. If the machine is turned off, turn it on. 3. If you were already in embroidery mode or when you switch to embroidery mode, a pop-up message tells you to clear the embroidery arm and remove the hoop before calibration. Touch OK. The machine will calibrate and the embroidery arm will move to the ready position. A Note: DO NOT calibrate the machine with the embroidery hoop attached as this can damage the needle, presser foot, hoop and/or the embroidery unit. Be sure to clear all materials from around the machine before calibrating so that the embroidery arm does not bump into anything while calibrating. Remove the Embroidery Unit 1. To store the embroidery unit in the embroidery case, move the embroidery arm to park position. See park position in the built-in user's guide. 2. Press the button at the left, underneath the embroidery unit (A) and slide the unit to the left to remove it. 3. Store the embroidery unit in the original black styrofoam packing material, placed in the soft carrying bag. Embroidery Preparations 52