Pfaff creative icon User Guide - Page 149

Embroidery Stitch-Out Auto Smart Save If a power outage has occurred, you will see this pop-up message when the machine is restarted. Touch OK in the pop-up to return to Embroidery Stitch-Out. This will load the design ready to stitch from approximately the same position it was interrupted. Tip: Before starting the embroidery go back a few stitches using the Step Stitch-by-Stitch to ensure that the threads will be secured. Change Needle (Optional Accessory) Cutwork designs and felting designs require special optional needle accessories. Cutwork designs require the creative™ Embroidery Cutwork Needle Kit (820945096) and felting designs require the creative™ Felting Embroidery Set (821068-096). When the machine stops and this pop-up message is shown, insert the corresponding optional needle. Touch OK and press the Start/Stop button to resume. Cutwork designs are marked with a cutwork needle symbol and felting designs are marked with a felting needle symbol in the creative icon™ embroidery collection. Note: Cutwork designs can also be stitched out without using the cutwork needles. The cutwork area will then have to be cut manually and the color block for the cutwork needle in the color block list should be skipped. Attention! If the machine stops and this pop-up appears on the screen you cannot continue embroidering. Wait a moment and touch OK when it is enabled. Check needle size and condition and check that your machine is threaded correctly. 149