Pioneer AVIC-Z140BH Owner's Manual - Page 187

Customizing preferences Chapter 31 Customizing preferences Using subwoofer output The navigation system is equipped with a subwoofer output mechanism, which can be turned on or off. p This function is not available when "Sub Woofer" is "Off". 1 Display the "AV Sound Settings" screen. = For details, refer to Displaying the screen for AV sound settings on page 181. 2 Touch [Sub Woofer]. 3 Touch [On]. The subwoofer output is turned on. # If you touch [Off], the subwoofer output is turned off. 4 Touch [Reverse] or [Normal] to select the phase of subwoofer output. 5 Touch [+] or [-] next to "Level" to adjust the output level. "+6" to "-24" is displayed as the level is increased or decreased. 6 Touch [c] or [d] next to "Frequency(Hz)" to select cut-off frequency. Each time you touch [c] or [d], cut-off frequencies are selected in the following order: 50Hz - 63Hz - 80Hz - 100Hz - 125Hz Only frequencies lower than those in the selected range are output from the subwoofer. Using the high pass filter When you cut lower sounds from the subwoofer output frequency, activate HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Display the "AV Sound Settings" screen. = For details, refer to Displaying the screen for AV sound settings on page 181. 2 Touch [HPF]. Each time you touch [HPF] selects cut-off frequencies in the following order: Off - 50Hz - 63Hz - 80Hz - 100Hz - 125Hz Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. p Settings are based on the FM tuner volume level, which remains unchanged. p You cannot select [SLA] when the FM tuner is selected as the AV source. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Display the "AV Sound Settings" screen. = For details, refer to Displaying the screen for AV sound settings on page 181. 3 Touch [SLA]. 4 Touch [+] or [-] to adjust the source volume. "+8dB" to "-8dB" is displayed as the source volume is increased or decreased. The following AV sources are set to the same source level adjustment volume automatically. ! CD, ROM, and DivX ! SD and USB ! Audio (Bluetooth audio), Pandora (Bluetooth connection) and aha (Bluetooth connection) ! Audio (Bluetooth audio), Pandora (Bluetooth connection) and aha (Bluetooth connection) ! AV1 and AV2 En 187