Pioneer DEH-80PRS Owner's Manual - Page 31

Operating this unit Section 02 Operating this unit 7 Plug the microphone into the microphone input jack on this unit. 8 Press M.C. to start the auto TA and EQ. 9 When the 10-second countdown starts, get out of the car and close the door within 10 seconds. The measurement tone (noise) is outputted from the speakers, and auto TA and EQ begins. # When all speakers are connected, auto TA and EQ is completed in about six minutes. # To stop auto TA and EQ, press M.C. again. # To cancel auto TA and EQ part way through, press BAND/ . 10 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Auto TA and EQ on page 43.) 11 Press BAND/ to cancel the auto TA and EQ mode. 12 Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. Using Bluetooth wireless technology Using Bluetooth telephone Important ! Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology, using it without the engine running can drain the battery power. ! Operations may vary depending on the kind of cellular phone. ! Advanced operations that require attention such as dialing numbers on the monitor, using the phone book, etc., are prohibited while driving. Park your vehicle in a safe place when using these advanced operations. Setting up for hands-free phoning Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. 1 Connection Operate the Bluetooth telephone connection menu. Refer to Connection menu operation on the next page. 2 Function settings Operate the Bluetooth telephone function menu. Refer to Phone menu operation on page 34. Basic operations Making a phone call ! Refer to Phone menu operation on page 34. Answering an incoming call 1 When a call is received, press M.C. Ending a call 1 Press . Rejecting an incoming call 1 When a call is received, press . Answering a call waiting 1 When a call is received, press M.C. Switching between callers on hold 1 Press M.C. En 31