Pioneer DEH-80PRS Owner's Manual - Page 36
Are You Sure? - internal amp
View all Pioneer DEH-80PRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 02 Operating this unit When operating external storage devices (USB, SD), you can select files from the list. 1 Press M.C. to select the setting. OFF-USB memory1-USB memory2-SD card Warning tone (warning tone setting) If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone. 1 Press M.C. to turn the warning tone on or off. AUX1 (front AUX input setting)/AUX2 (rear RCA input setting) Activate this setting when using an auxiliary device connected to this unit. 1 Press M.C. to turn auxiliary setting on or off. Dimmer (dimmer setting) To prevent the display from being too bright at night, the display is automatically dimmed when the car's headlights are turned on. You can turn the dimmer on or off. 1 Press M.C. to turn dimmer on or off. Contrast (display contrast setting) 1 Press M.C. to select the setting mode. 2 Turn M.C. to adjust the contrast level. 0 to 15 is displayed as the level is increased or decreased. Digital ATT (digital attenuator) When listening to a CD or other source on which the recording level is high, setting the equalizer curve level to high may result in distortion. You can switch the digital attenuator to low to reduce distortion. ! Sound quality is better at the high setting so this setting is usually used. 1 Press M.C. to select the setting. HIGH (high)-LOW (low) AUDIO reset (audio reset) You can reset all audio functions. 1 Press M.C. Does it RESET? appears in the display. 2 Press M.C. 3 Turn M.C. to select desired setting. Are You Sure? appears in the display. 4 Press M.C. Complete appears in the display and audio functions are reset. ! To cancel this function on the way, press BAND/ . Internal AMP (power amp setting) 36 En This unit features high power amplifier. However, in particular system, external amplifiers are used instead of internal amplifier. If you use external amplifiers in order to establish a multi-amp system, and don't use internal amplifier, it is recommended to turn off the internal amplifier. Turning off internal amplifier reduces the noise that comes from the behavior of internal amplifier. 1 Press M.C. to turn the internal power amplifier on or off. Demonstration (demo display setting) 1 Press M.C. to turn the demo display on or off. Ever-scroll (scroll mode setting) When ever scroll is set to ON, recorded text information scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once. 1 Press M.C. to turn the ever scroll on or off. BT AUDIO (Bluetooth audio activation) You need to activate the BT Audio source in order to use a Bluetooth audio player. 1 Press M.C. to turn the BT Audio source on or off. Clear memory (resetting the Bluetooth wireless technology module) Bluetooth device data can be deleted. To protect personal information, we recommend deleting this data before transferring the unit to other persons. The following settings will be deleted. ! phone book entries on the Bluetooth telephone ! preset numbers on the Bluetooth telephone ! registration assignment of the Bluetooth tele- phone ! call history of the Bluetooth telephone ! information of the connected Bluetooth telephone ! PIN code of the Bluetooth device 1 Press M.C. to show the confirmation display. YES is displayed. Clearing memory is now on standby. If you do not want to reset phone memory, turn M.C. to display CANCEL and press to select. 2 Press M.C. to clear the memory. Cleared is displayed and the settings are deleted. ! While this function is in use, do not turn off the engine. BT Version info. (Bluetooth version display) You can display the system versions of this unit and of Bluetooth module.