Pioneer MEP-7000 Owner's Manual - Page 8

FEATURES CD-G KARAOKE CD-G discs can be played for easy karaoke performances. The karaoke image can also be output to large external monitors. TEMPO CONTROL High-performance 60 mm slider allows free modification of track speed. The digital readout in units of 0.02 % (±6 % range only) makes possible more accurate and simpler tempo synchronization. TEMPO CONTROL RANGE Four greater ease of use, the maximum variable range can be set to four levels, ±6 %, ±10 %, ±16 %, and WIDE (WIDE is limited to music CD (CD-DA) only). MASTER TEMPO Changes music tempo without changing pitch. CUE BACK CUE After storing the Cue point in memory, press the CUE button while playing the unit to go back to the Cue point and start over. CUE/LOOP MEMORY Cue points and loop points can be stored in the internal memory, and called up as required. AUTO CUE Auto cue automatically locates the track's start point even if it differs from the track's frame, allowing the player to start instantly at a press of the play/pause () button. CUE POINT SAMPLER The sound from the memorized cue point can be reproduced by one touch, which can be used as the start point check and the sampler. REAL TIME SEAMLESS LOOP This function simplifies setting and releasing loops. This function lets you set a loop while you are playing a track. A loop can also be set at the end of the track so that the track does not stop. In addition, an ADJUST mode has been added to enable one-touch adjustment to the Loop-out point and facilitate loop operation. HOT LOOP During loop play, pressing the IN/CUE/HOT LOOP button causes playback to instantly return to the loop-in point and once again begin playback from that point. By using this function in sync with the track's rhythm, a variety of new play scenarios becomes possible. RELOOP Allows you to replay a loop any number of times. Press the RELOOP/EXIT button after releasing loop play to return to the loop start point. Clever use of on and off in combination with the rhythm make it possible to create new sound effects. PLAYING ADDRESS This bar graph provides a visual representation of track playback progress that enables you to see current playback position just like you can on an analog record by checking needle position. The length of the bar shows current position and a flashing bar provides advance notice of track end. SLOT IN Discs are loaded directly without opening doors or trays, making track selection that much faster. FADER START When connected to a Pioneer DJ Mixer, the mixer's fader control can be used to perform quick start and back cue operations. CD-TEXT When a music CD (CD-DA) is played that supports CD-TEXT, the title, artist, and album text information recorded on that disc can be utilized. LEGATO LINK Equipped with "Legato Link Conversion" function. When playing music CDs, this function reproduces the 20 kHz+ treble region lost in the CD format, thus producing high-fidelity sound approaching that of analog record turntables. VIBRATION RESISTANT Equipped with "shock-proof memory" and the same floating mechanism featured in Pioneer's Carrozzeria car audio series, for superb vibration resistance that withstands sound skips. 8 En