Pioneer UDP-LX500 Operating Instructions - Page 18

02 About Control Function with HDMI The functions work when a control function with HDMI-compatible Pioneer TV or AV system (AV receiver or amplifier, etc.) is connected to the player using an HDMI cable.  Setting the HDMI Mode The UDP-LX500 has two HDMI OUT (MAIN, SUB) terminals. See page 16 for the details on these terminals. To make the setting, press HOME MENU to display the Home Menu, select Initial Setup  HDMI  HDMI Mode. Also refer to the operating instructions for the TV and AV system (AV receiver or amplifier, etc.).  To use the control function with HDMI • The control function with HDMI operates when control function with HDMI is set to On for all devices connected with HDMI cables. • Once the connections and the settings of all the devices are finished, be sure to check that the player's picture is output to the TV. (Also check after changing the connected devices and reconnecting HDMI cables.) The control function with HDMI may not operate properly if the player's picture is not properly output to the TV. Pressing the HDMI button on the remote control will display the current HDMI Mode setting on the player's front panel display. To switch the setting, press HDMI button again. See the table below and set up the HDMI Mode according to your connection style. HDMI Mode HDMI OUT MAIN HDMI OUT SUB Video Audio Control Video Audio Control Single ✓ ✓ ✓ ✗ ✗ ✗ Separate ✓ ✗ ✗ ✗ ✓ ✓ Pure Audio ✗ ✗ ✗ ✗ ✓ ✓ • For some models, the control function with HDMI may be referred to as "KURO LINK" or "HDMI Control". • The control function with HDMI does not work with devices of other brands, even if this player is connected with an HDMI cable.  What the control function with HDMI can do • Operating the player with the TV's remote control. Such player operations as starting and stopping playback and displaying the menus can be performed from the TV. • The player's playback picture is displayed on the TV's screen. (Auto-select function) The input switches automatically on the TV and AV system (AV receiver or amplifier, etc.) when playback is started on the player or the HOME MENU is displayed. When the input is switched, the playback picture, the HOME MENU appears on the TV. • The power of the TV and the player turns on and off automatically. (Simultaneous power function) When playback on the player is started or the HOME MENU is displayed, if the TV's power was off, its power turns on automatically. When the TV's power is turned off, the player's power automatically turns off. 18 En