Pioneer UDP-LX500 Operating Instructions - Page 55

Problem Secondary audio or interactive audio is not output. Check Is HDMI Audio Out properly set? Are Digital Output properly set? Remedy 08 When listening to the sound from an HDMI OUT terminal, set HDMI Audio Out to PCM (page 42). When listening to the sound from an DIGITAL OUT terminal, set Digital Output to Reencode or PCM (page 41). English Sound is fast or slow. When an HDMI cable is When a Pioneer AV receiver or amplifier compatible with the PQLS connected, are audio function is connected directly to the player's HDMI OUT terminal signals being output from using an HDMI cable, the PQLS function is activated when playing devices connected with an audio CD (CD-DA). Because of this, the sound output from cables other than HDMI components other than the ones connected by an HDMI cable may cables? be fast or slow. If this happens, set Control to Off (page 42). Français After a disc is inserted, Are there too many files When a disc on which files are recorded is inserted, depending Loading stays displayed and recorded on the disc? on the number of files recorded on the disc, loading may take playback does not start. several dozen minutes. g is displayed in file names, etc. The characters that cannot be displayed on this player are displayed in g. A message indicating low memory appears while playing a BD-ROM disc. • Connect a USB device (page 22). • Erase the data stored on the connected USB device from BUDA Setup (page 44). Español Control function Problem Check Remedy Control function does not Is the HDMI cable work. properly connected? To use the Control function, connect the TV and AV system (AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 17). Depending on the HDMI Use an 18 Gbps-compatible Premium High Speed HDMI®/TM cable being used, the cable (optional). control function with HDMI may not operate properly. Is this player connected to If video signals are being output from a terminal other than the the TV using an HDMI HDMI OUT terminal, the Control function does not work. cable to watch the picture? Connect to the TV using an HDMI cable (page 17). Is the HDMI Mode set appropriately? • When connecting a device supporting the control function to the HDMI OUT (MAIN) terminal, set the HDMI Mode to Single. • When connecting a device supporting the control function to the HDMI OUT (SUB) terminal, set the HDMI Mode to Separate or Pure Audio (page 42). Is Control set to On on the Set Control to On on the player (page 42). player? Does the connected device support the Control function? • The Control function will not work with devices of other brands that do not support the Control function, even when connected using an HDMI cable. • The Control function will not work if devices that do not support the Control function are connected between the Control-compatible device and the player. See page 18. • Even when connected to a Pioneer product compatible with the Control function, some of the functions may not work. Also refer to the operating instructions for the connected device. Is Control set to On on the Set Control to On on the connected device. The Control connected device? function operates when Control is set to On for all devices connected to the HDMI OUT terminal. Once connections and settings of all the devices are finished, be sure to check that the player's picture is output to the TV. (Also, check after changing the connected devices and connecting and/ or disconnecting HDMI cables.) If the player's picture is not being output to the TV, the Control function may not work properly. For details, refer to the operating instructions of the connected device. Are multiple players connected? The Control function may not work if 4 or more players, including this player, are connected by an HDMI cable. 55 Depending on the connected device, the function may not work. En