Pioneer UDP-LX500 Operating Instructions - Page 58
Others
View all Pioneer UDP-LX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
08 Others Problem Check Remedy Power does not turn on. The player's power turns off automatically. The player's power turns on automatically. Is the power cord properly connected? • Plug the power cord securely into the power outlet (page 23). • Unplug the power cord, wait several seconds, then plug the power cord back in. Is Auto Power Off set to 15 If Auto Power Off is set to 15 min or 30 min, the player's power min or 30 min? automatically turns off if no operation is performed for the set amount of time (page 44). Is Control set to On? The player's power may turn off together with the power of the TV connected to the HDMI OUT terminal. If you do not want the player's power to turn off when the TV's power is turned off, set Control to Off (page 42). Is Control set to On? The player's power may turn on together with the power of the TV connected to the HDMI OUT terminal. If you do not want the player's power to turn on when the TV's power is turned on, set Control to Off (page 42). This unit cannot be operated. • Use within the specified usage temperature range (page 62). • If the power cannot be turned off (to standby), reset the unit. Press and hold the ^ STANDBY/ON button for approx. five seconds. When the button indicator turns off, release your finger.The unit restarts and can now be operated. The player cannot be Are you operating the operated with the remote remote control from a control. point too far away from the player? Operate from within 7 m (23 ft.) of the remote control sensor. Are the batteries dead? Replace the batteries (page 6). Unit heats up during use. Depending on the usage environment, the temperature of the unit's cabinet may increase somewhat during use, but this is not a malfunction and there is no need to worry. Input of the connected TV Is Control set to On? and AV system switches automatically. The input of the TV and AV system (AV receiver or amplifier, etc.) connected to the HDMI OUT terminal may automatically switch to the player when playback starts on the player or the menu screen (Source function, etc.) is displayed. If you do not want the inputs of the connected TV and AV system (AV receiver or amplifier, etc.) to switch automatically, set Control to Off (page 42). Settings I have made have been cleared. • Have you disconnected the power cord while the player's power was on? • Has there been a power failure? Always press ^ STANDBY/ON on the player's front panel or ^ STANDBY/ON on the remote control and check that POWER OFF has turned off from the player's front panel display before disconnecting the power cord. Be particularly careful when the power cord is connected to the AC outlet on another device because the player turns off in conjunction with the device. USB (external storage) Is the USB device device does not work properly connected? with this player properly. • Turn the player's power off, then turn the power back on. • Turn the player's power off, then reconnect the external storage device (page 22). Is the USB device connected via an extension cable? Is the external storage device connected to the USB port via a memory card reader or USB hub? Do not use an extension cable. The player may not work properly with it. External storage device may not work if connected to the USB port via a memory card reader or USB hub. Does the external storage External storage devices may not be recognized if they device contain multiple contain multiple partitions. partitions? Is the external storage Turn the player's power off, then disable the write-protection. device write-protected? Is the USB device's file USB devices formatted in the FAT16 or FAT32 file system can system FAT16 or FAT32? be used. 58 Some external storage devices may not operate. En