Pioneer UDP-LX500 Operating Instructions - Page 23

Connecting to the Connecting with a LAN 02 network through LAN cable (wired LAN) interface Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the English By connecting this player to the network via the LAN terminal, you can play image, audio and video files stored on the components on the network, including your computer, using Source inputs. built-in DHCP server function) with a straight LAN cable (CAT 5 or higher). UDP-LX500's rear panel Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server function, it is necessary to set up the network manually. For details, see Setting the IP address on page 45 . Français Español Note • Refer to the operation manual of the equipment you have as the connected equipment and connection method may differ depending on your Internet environment. • When using a broadband Internet connection, a contract with an Internet service provider is required. For more details, contact your nearest Internet service provider. • Please note that Pioneer will accept no responsibility whatsoever for communications errors or problems related to the user's network connection environment or connected devices. Contact your provider or the manufacturer of your connected devices. LAN cable Modem (commerciall y available) Internet Computer LAN 3 2 1 WAN Router LAN cable (commercially available)  LAN terminal specifications LAN terminal: Ethernet jack (10BASE-T/100BASETX/1000BASE-T) Connecting the power cord Connect the power cord after all the connections between devices have been completed. UDP-LX500's rear panel To wall outlet Power cord (included) 23 En