Ricoh Aficio SP W2470 Hardware Guide - Page 30

Setting Up Loading Paper This section explains what to do when paper runs out and needs reloading. R CAUTION: • Be careful when replacing the roll paper or removing misfed paper by follow- ing the operating instructions properly. Otherwise, an injury may result from 2 the paper cutter inside. R CAUTION: • The fusing section of this machine might be very hot. Caution should be tak- en when removing misfed paper. R CAUTION: • When replacing or loading the paper roll, do not put the paper roll on the up- per of the paper roll tray. Otherwise the tray may fall and an injury may result. • Hold the paper rolls horizontally with both hands. When you grab the paper holder and hold the paper roll vertically, the paper roll may fall off and an injury may result. R CAUTION: • When replacing or loading the paper, or clearing paper jams, pull out the cut paper tray slowly with both hands. Do not pull out the cut paper tray with a single hand. Otherwise the rear of the cut paper tray may fall and an injury may result. ❖ Default settings Tray 1 (Paper roll 1): A0 (841 mm) Tray 2 (Paper roll 2): A2 (420 mm) Tray 3 (Cut paper): A4K Bypass tray: A4K Tray 1 (Paper roll 1): 36 inch Tray 2 (Paper roll 2): 18 inch Tray 3 (Cut paper): 12" × 18"K Bypass tray: 81/2" × 11"K 20