Ricoh Aficio SP W2470 Hardware Guide - Page 55
Configuring Network Settings When Using NetWare, Auto Se, Auto Select, Host Interface, Network
View all Ricoh Aficio SP W2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Ethernet Configuration Configuring Network Settings When Using NetWare If you use NetWare, select the appropriate NetWare frame type. Select one of the items below as necessary. • Auto Select • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP Important ❒ Usually, you can use the default (Auto Select). When you first select [Auto Select], the frame type detected by the printer is adopted. However, if your net- 4 work can use more than two frame types, the printer may fail to select the correct frame type with [Auto Select] selected. In this case, select the preferred frame type. A Press the {Menu} key. BAL051S B Press the {U} or {T} key to select [Host Interface], and then press the {OK} key. C Press the {U} or {T} key to select [Network], and then press the {OK} key. 45