Ricoh Aficio SP W2470 Hardware Guide - Page 51
Active, Escape, Network, Machine IPv4 Address, IP Add., Subnet M, Gateway, and then press
View all Ricoh Aficio SP W2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Ethernet Configuration E Press the {U} or {T} key to select the appropriate network protocol, and then press the {OK} key. F Press the {U} or {T} key to select [Active] or [Inactive], and then press the {OK} key. 4 Set other protocols you need to set in the same way. • Select [Inactive] for unused protocols. • Enable IPv4 to use the pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5. G Press the {Escape} key until the screen returns to the [Network] menu. H If you use IPv4, assign the IPv4 address to the printer. Press the {U} or {T} key to select [Machine IPv4 Address], and then press the {OK} key. To get the IP address for the printer, contact your network administrator. I To specify the IP Address, press [IP Add.]. If you use IPv4, also assign subnet mask and gateway address. To assign these, press [Subnet M] or [Gateway]. 41