Ricoh C811DN Operating Instructions - Page 199

10. Removing Misfed Paper Removing Misfed Paper An error message appears if a paper misfeed occurs. The error message gives the location of the misfeed. Check the location and remove the paper. • The inside of this printer becomes very hot. Do not touch parts labeled " " (indicating a hot surface). Touching these parts will result in burns. • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not. • Do not forcefully remove misfed paper, it may tear and torn pieces may remain inside the printer. • When paper is misfed a number of times, the following are possible causes. • The control panel settings do not match the size or orientation of the loaded paper. • The friction pad is dirty. • Misfed paper may be covered with toner. Be careful not to get toner on your hands or clothes. • If paper is still misfed after you have checked the above-mentioned causes, contact your sales or service representative. • p.152 "Cleaning the Friction Pads". 10 197