Ricoh C811DN Operating Instructions - Page 37
Attaching the SDRAM Module
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Attaching the SDRAM Module Attaching the SDRAM Module • Do not touch the inside of the controller board compartment. It may cause a machine malfunction or a burn. 2 • Before touching the SDRAM module, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the SDRAM module. • Do not subject the memory unit to physical shocks. • The printer comes equipped with 256 MB of memory. This can be expanded to a maximum of 512 MB. • Before using the new memory unit, you must configure settings in the printer driver. 1. Turn the printer off and unplug the power cable. 2. Remove the five screws securing the controller board. ATU003S The removed screws will be used to secure the controller board again later. 3. Holding the handle, carefully pull out the controller board. ATU004S 35