Ricoh C811DN Operating Instructions - Page 70
Specifying an IP Address (No DHCP), printer will use.
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4. Configuration Specifying an IP Address (No DHCP) Follow this procedure to assign a specific IP address to the printer. This is only necessary when you will use the printer on a network without DHCP, or want to prevent the printer's IP address from changing. Before beginning, make sure that you know the IP address, subnet mask and gateway address that the printer will use. 1. Press the [Menu] key. 4 ATU050S 2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key. 3. Press the [ ] or [ ] to select [Network], and then press the [OK] key. 4. Press the [ ] or [ ] key to select [Effective Protocol], and then press the [OK] key. 68
Specifying an IP Address (No DHCP)
Follow this procedure to assign a specific IP address to the printer. This is only necessary when you will use
the printer on a network without DHCP, or want to prevent the printer's IP address from changing.
Before beginning, make sure that you know the IP address, subnet mask and gateway address that the
printer will use.
1.
Press the [Menu] key.
ATU050S
2.
Press the [
] or [
] key to select [Host Interface], and then press the [OK] key.
3.
Press the [
] or [
] to select [Network], and then press the [OK] key.
4.
Press the [
] or [
] key to select [Effective Protocol], and then press the [OK] key.
4. Configuration
68
4