Ricoh C811DN Operating Instructions - Page 95

Additional cautions Special paper Special paper standard Printer setup Printer driver setup Supported paper feeding tray Duplex printing Envelopes Printer setup Printer driver setup Supported paper feeding tray Paper Recommendations per 4]. High numbered settings allow thicker paper to be used, but are printed more slowly. When selecting the paper setting depending on the type, select [Coated Paper 5] to [Coated Paper 7]. High numbered settings allow thicker paper to be used, but are printed more slowly. • Print speed is slightly slower than when using plain paper. When you cannot print successfully with other pa- per type settings, set special paper. 5 Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Special Paper 1] to [Special Paper 3]. Select [Special Paper 1] to [Special Paper 3] in [Paper Type]. Any input tray can be used. • Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. Supported Select [Paper Input] [Paper Type: Bypass Tray ] [Envelope]. Select [Envelope Settings] in [Paper Type]. Bypass tray 93