Ricoh C811DN Operating Instructions - Page 90
Thick paper, Select [Thick Paper 1] to [Thick Paper 3] in [Paper
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
5. Paper and Other Media Thick paper Paper thickness Printer setup 5 Printer driver setup Supported paper feeding tray Duplex printing Additional cautions 106 to 253 g/m2 • [Thick Paper 1]: 106 to 169 g/m2 (28 to 45 lb.) • [Thick Paper 2]: 170 to 219 g/m2 (45 to 58 lb.) • [Thick Paper 3]: 220 to 253 g/m2 (59 to 67 lb.) Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Thick Paper 1] to [Thick Paper 3]. Select [Thick Paper 1] to [Thick Paper 3] in [Paper Type]. • [Thick Paper 1] [Thick Paper 2]: any input tray can be used. • [Thick Paper 3]: the bypass tray can be used. • Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. • [Thick Paper 1]: supported • [Thick Paper 2] [Thick Paper 3]: not supported • Print speed is slightly slower than when using plain paper. • When printing on the reverse side of thick paper that is already printed on, select [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Thick 1:Dup.Back] or [Thick 2:Dup.Back] using control panel or printer driver. 88