Ricoh C811DN Operating Instructions - Page 55
Parallel Cable Connection., Fully insert the IEEE 1284 interface board.
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4. Fully insert the IEEE 1284 interface board. Installing the IEEE 1284 Interface Board 2 ATU024S Confirm that the IEEE 1284 interface board is firmly connected to the controller board. 5. Tighten the two screws to secure the interface board. ATU025S • Confirm that the IEEE 1284 interface board was correctly installed by printing the configuration page. If it is correctly installed, "Parallel Interface" will appear for "Device Connection" on the configuration page. • If the board was not installed properly, repeat the procedure from step 2. If it cannot be installed correctly even after reattempting installation, contact your sales or service representative. • For information on printing the configuration page, see "Test Printing", Quick Installation Guide. • "Test Printing", Quick Installation Guide • p.66 "Parallel Cable Connection". 53