Ricoh C811DN Operating Instructions - Page 94
Coated paper, thickness, select [Coated Paper 1] to [Coated Pa
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5. Paper and Other Media Duplex printing Glossy paper setup Additional cautions 5 Coated paper Printer setup Printer driver setup Supported paper feeding tray Duplex printing Coated paper setup 92 stacked higher than the paper guides inside it. Supported Default: [Glossy Paper 1] If the print quality needs to be improved, select [Maintenance] [General Settings] [Glossy Paper Setting] [Glossy Paper 1] or [Glossy Paper 2] to change the setting value to a different number depending on the paper thickness that you are using. High numbered settings allow thicker paper to be used, but are printed more slowly. • Print speed is slightly slower than when using plain paper. Select [Paper Input] [Paper Type: XXX] (XXX: Tray 1 to 5, Bypass Tray) [Coated Paper]. Select [Coated Paper] in [Paper type]. Any input tray can be used. • Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides inside it. Not supported Default: [Coated Paper 1] If the print quality needs to be improved, select [Maintenance] [General Settings] [Coated Paper Setting] [Coated Paper 1] to [Coated Paper 7]. When selecting the paper setting depending on the thickness, select [Coated Paper 1] to [Coated Pa-