Ricoh C811DN Operating Instructions - Page 24

2. Installing Options Option List Description Bridge Unit C810 Bridge unit Booklet Finisher SR3000 Booklet finisher Punch Kit PU3000 NA 2 Punch Kit PU3000 EU Punch kit (for booklet finisher, 2 and 3 holes type) Punch kit (for booklet finisher, 2 and 4 holes type) Punch Kit PU3000 SC Punch kit (for booklet finisher, 4 holes type) Finisher SR3030 2 tray finisher Punch Unit Type 3260 NA 3/2 Punch kit (for 2 tray finisher, 2 and 3 holes type) Punch Unit Type 3260 EU 2/4 Punch kit (for 2 tray finisher, 2 and 4 holes type) Punch Unit Type 3260 SC Punch kit (for 2 tray finisher, 4 holes type) Order of Option Installation When installing multiple options, the following order is recommended: 1. Attach the 500-sheet paper feed unit The 500-sheet paper feed unit can be used in combination with the 1000-sheet paper feed unit. In this case, attach the 500-sheet paper feed unit to the 1000-sheet paper feed unit before attaching to the printer. 2. Attach the 1000/2000-sheet paper feed unit Either the 1000-sheet paper feed unit or 2000-sheet paper feed unit can be attached, but not both. 3. Attach the SDRAM module Install the expansion memory in the controller board slot. There are two types of memory units, 128 MB and 256 MB. 4. Install the user account enhance unit Install the module in the user account enhance unit slot of the controller board. 5. Install the optional interface board Install an optional Gigabit Ethernet board, IEEE 802.11b interface unit, Bluetooth interface unit or IEEE 1284 interface board in the left slot. Install a USB host board in the right slot. 6. Install a camera direct print card or security card Insert the camera direct print card or security card in the card slot of the controller board. 22