Ricoh C811DN Operating Instructions - Page 71
To specify the IP Address, press [IP Add]., If you use IPv4
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Ethernet Configuration 5. Press the [ ] or [ ] key to select the appropriate network protocol, and then press the [OK] key. 6. Press the [ ] or [ ] key to select [Active] or [Inactive], and then press the [OK] key. 4 Set other protocols you need to set in the same way. • Select [Inactive] for unused protocols. • Enable IPv4 to use the pure IPv4 environment of NetWare5/5.1, Netware 6/6.5. 7. Press the [Escape] key until the screen returns to the [Network] menu. 8. If you use IPv4, assign the IPv4 address to the printer. Press the [ ] or [ ] key to select [Machine IPv4 Address], and then press the [OK] key. To get the IP address for the printer, contact your network administrator. 9. To specify the IP Address, press [IP Add]. If you use IPv4, also assign the subnet mask and gateway address. To assign these, press [Subnet M] or [Gateway]. 10. Press the [ ] or [ ] to Enter the address, and then press the [OK] key. Press the [ ] or [ ] key to enter the left-most entry field of the address. After entering the left field, press the [ ] key, and then you can enter the next field. After completing entry of the all fields, press the [OK] key. Use the same method to assign the subnet mask and gateway address. • Change the IP address from "011.022.033.044" to an IP address supported by your network. 69