Ricoh C811DN Operating Instructions - Page 61
Connecting the Printer Cables, Ethernet Cable Connection - - supplies
UPC - 026649028182
View all Ricoh C811DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Connecting the Printer Cables Ethernet Cable Connection Prepare a hub and other network devices, and connect the Ethernet cable to the printer. Connect 10BASE T or 100BASE TX cable to the printer's Ethernet port. For 1000BASE T, the optional Gigabit Ethernet board is available. 3 • An Ethernet cable is not supplied with this printer. Select your cable according to the network environment. • The printer's Ethernet and USB ports are not available when the Gigabit Ethernet board is attached to the printer. Connecting to the standard Ethernet port 1. Attach the ferrite core supplied with this printer at the printer end of the Ethernet cable. ASZ269S 2. Connect the Ethernet cable to the Ethernet port that is located on the left side of the printer. ATU032S 3. Connect the other end of the cable to the network, for example using a hub. 59