Ricoh CL7200DT2 Setup Guide - Page 124
Host Interface, Active Protocol, TCP/IP, TCP/IP, Active
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Configuration The [Menu] screen appears on the display. B Press the {U} or {T} key to display [Host Interface] menu, and then press the {# Enter} key. Menu: Host Interface The interface setting menu appears. C Press the {U} or {T} key to display [Network Setup], and then press the {# Enter} key. The network setup menu appears. D Press the {U} or {T} key to display [Active Protocol], and then press the {# Enter} key. E Press the {U} or {T} key to select Active Protocol, and then press the {# Enter} key. Active Protocol: TCP/IP The following example explains activating TCP/IP. The [Active] or [Not Active] selection screen appears. F Press the {U} or {T} key to select [Active] or [Not Active], and then press the {# Enter} key. TCP/IP: *Active After the settings are made, about two seconds later, the screen returns to the active protocol menu. G Set other protocols you need to set in the same way. H Press the {Escape} key, the screen returns to the network setup menu. ❒ The default is "Active". ❒ Leave unused protocols "Not Active". ❒ Enable TCP/IP to use the Pure IP environment of NetWare 5/5.1, NetWare 6/6.5. I If you use TCP/IP, assign the IP address to the printer. Press the {U} or {T} key to display [IP Address], and then press the {# Enter} key. The current IP address appears on the display. 124