Ricoh CL7200DT2 Setup Guide - Page 129
Host Interface, Comm. Mode, 802.11 Ad hoc, Channel
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Configuration B Press the {U} or {T} key to display [Host Interface], and then press the {# Enter} key. Menu: Host Interface The interface setting menu appears. C Press the {U} or {T} key to display [IEEE 802.11b], and then press the {# Enter} key. The IEEE 802.11b setting menu appears. D Press the {U} or {T} key to display [Comm. Mode], and then press the {# Enter} key. E Press the {U} or {T} key to select the transmission mode of IEEE 802.11b, and then press the {# Enter} key. Comm. Mode: *802.11 Ad hoc After the settings are made, about two seconds later, the screen returns to the IEEE 802.11b setting menu. ❒ The factory default is [802.11 Ad hoc]. ❒ To use an IEEE 802.11b card for which the SSID (Network Name) setting is not necessary, select [Ad hoc]. ❒ The transmission mode of IEEE 802.11b can also be set using a Web browser. For details, see Web Image Monitor Help, and "Using Web Image Monitor", Software Guide. F If [802.11 Ad hoc] or [Ad hoc] is selected for [Comm. Mode], set the channel to use for transmission. ❒ Confirm the network administrator for the channel to use. G Press the {U} or {T} key to display [Channel], and then press the {# Enter} key. The channel currently used appears on the display. H Press the {U} or {T} key to enter the channel, and then press the {# En- ter} key. Channel: (1-11) 11 129