Ricoh CL7200DT2 Setup Guide - Page 93
Press the antenna to extend it.
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Installing Options G With the side labeled INSERT on the right, slowly insert the card into the Bluetooth interface unit, until it stops. H Press the antenna to extend it. I Attach the antenna cap to the card. ❒ Be sure to return the provided screwdriver to its original position on the inside of the front cover. ❒ After finishing installation, check the Bluetooth interface unit is installed properly: print the configuration page from the "List/Test Print" menu. If it is installed properly, you will see "Bluetooth" for "Device Connection". ❒ If the Bluetooth interface unit is not installed properly, reinstall it from the start of the procedure. If you cannot install it properly even after attempting reinstallation, contact your sales or service representative. For details about printing the configuration page, see p.46 "Test Printing". 93