Ricoh CL7200DT2 Setup Guide - Page 95
Interface Cable 6 pin
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Installing Options ❖ Interface Cable (6 pin × 6 pin) ❖ Interface Cable (6 pin × 4 pin) B Turn off the power then unplug the power cable, and then interface ca- ble. C Slowly open the front cover of the printer, remove the green screwdriv- er, and then close the cover. p.54 "Using the Screwdriver" D Remove the screws by turning them counterclockwise using the provid- ed screwdriver, and then remove the cover of the IEEE 1394 interface board slot. The removed screws and cover will not be needed now but save them in case the cover needs to be reattached. 95
Installing Options
95
❖
Interface Cable (6 pin
×
6 pin)
❖
Interface Cable (6 pin
×
4 pin)
B
Turn off the power then unplug the power cable, and then interface ca-
ble.
C
Slowly open the front cover of the printer, remove the green screwdriv-
er, and then close the cover.
p.54 “
Using the Screwdriver
”
D
Remove the screws by turning them counterclockwise using the provid-
ed screwdriver, and then remove the cover of the IEEE 1394 interface
board slot.
The removed screws and cover will not be needed now but save them in case
the cover needs to be reattached.