Ricoh CL7200DT2 Setup Guide - Page 126
Network Setup, Frame Type NW, Frame Type NW, Auto Select
UPC - 026649024139
View all Ricoh CL7200DT2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Configuration N Press the {U} or {T} key to display [DHCP], and then press the {# Enter} key. Network Setup: DHCP O Press the {U} or {T} key to display [On], and then press the {# Enter} key. DHCP: *On ❒ "p" shows the current setting. ❒ After about two seconds, the display returns to the network setup menu. P If you use NetWare, select the frame type for NetWare. Select one of the items below if necessary. • Auto Select (Default) • Ethernet II • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP ❒ Usually, use the default setting ("Auto Select"). When you first select "Auto Select", the frame type detected by the printer is adopted. If your network can use more than two frame types, the printer may fail to select the correct frame type if "Auto Select" is selected. In this case, select the appropriate frame type. Q Press the {U} or {T} key to display [Frame Type (NW)], and then press the {# Enter} key. Network Setup: Frame Type (NW) The current setting appears on the display. R Press the {U} or {T} key to display the frame type you want to use, and then press the {# Enter} key. Frame Type (NW): *Auto Select 126