Samsung ML-1250 User Manual (user Manual) (ver.1.00) (English) - Page 125
CONFIG, Power Save, Econo Mode, Auto Continue, Jam Recovery, Altitude, Timeout, Paper Type
View all Samsung ML-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Printing from DOS Applications CONFIG • Power Save determines the length of time the printer waits after a job is printed before it goes to a reduced power state. If the printer is used frequently, select OFF which keeps the printer ready to print with the minimum warm-up time. This uses more electricity to keep the printer warm and ready to print. • Econo Mode determines the toner quantity the printer should use when printing. If set to ON, the printer conserves toner when printing. The default value is OFF, which provides 100% usage. • Auto Continue determines what action the printer should take when a manual feed print job is sent to the printer and there is no paper in the Manual input tray. If set to ON, the printer will pick up the paper from the Automatic input tray after fifteen seconds. Otherwise, the printer will wait for you to load paper in the Manual Tray. • Jam Recovery determines what action the printer should take when a paper jam occurs. When set to OFF, the printer does not reprint a page that has jammed. When set to ON, the printer keeps the image in memory for a printed page until the printer signals that the page has successfully printed. The printer reprints all jammed pages. • Altitude With this option checked, you can optimize the print quality for a low pressure area, such as a high ground. JOB • Timeout determines the amount of time (in seconds) the printer will wait before printing the last page of a print job that does not end with a command to print the page or a formfeed character. Valid range is 0 to 300 seconds. • Paper Type provides the printer with information about the type of paper to be used for a print job. For the best result, set this to the paper type you loaded in the paper tray in the printer. When using the plain paper, set this to Plain paper. • SRT Mode makes the printer optimize the print quality to 1200 dpi class image quality. A.26 APPENDIX