Samsung ML-1250 User Manual (user Manual) (ver.1.00) (English) - Page 92

aBbCc aBbCc aBbCc aBbCc aBbCc Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AParBobbleCmc Solution Background scatter Background scatter results from bits of toner distributed on the printed page. AAaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Misformed characters • The paper may be too damp. Try printing AwiathBabdCiffcerent batch of paper. Do not open packages of pAapaeBr ubnCtilc necessary so that the paper does not absoArbatBoobmCucch moisture from the air. AaBbCc • If background scatter occurs on an enveloApea, BchbaCngce your printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause this problem. • If background scatter covers the entire surface of a printed page, adjust the print resolution through your software application or the printer properties. AaBbCc AaBbCc • iImf cahgaersa,cttheerspaarpeerimsptAAorocaakpBBemrbblayCCyfobccremteodo, producing hollow slick. Try a different paper. See "Paper SpAeacifBicbatCioncs" on page A.2. • If characters are improperly formed, producing a wavy effect, the scanner unit may need service. Verify that it also occurs on a demo page by pressing the Demo button on the control panel when printer is ready. If you need service, contact a service representative. Page skew AAAAaAaaaBaBBBbBbbbCbCCCCccccc • Check the paper type and quality. See "Paper Specifications" on page A.2. • Make sure that the paper or other media is loaded correctly and that the guides are not too tight or too loose against the paper stack. 7.14 PROBLEM SOLVING