Samsung ML-1250 User Manual (user Manual) (ver.1.00) (English) - Page 96
Waiting for the Demo button to be pressed, Door open, Canceling a job or memory out, LSU error, Error
View all Samsung ML-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Troubleshooting Error Messages Error Paper Data Waiting for the Demo button to be pressed While printing in the manual feed mode, the printer is waiting for the Demo button to be pressed. • Press the Demo button on the control panel to start printing. You must press the button to print each page after loading paper into the manual input tray. Error Paper Data Door open The printer front cover may be open. • Check that the printer front cover door is closed properly. Error Paper Data Canceling a job or memory out If your printer is canceling a job (see page 5.5), the Error light blinks. When cancellation is complete, the message will automatically clear. The printer memory may not be sufficient for the print job. The page being printed may have been too complex for the memory capacity of the printer. Press the Cancel/Reprint button to cancel the current job. • Try to free up memory by removing any unnecessary fonts, macros, or any data currently in printer memory. • Simplify the image or print at a lower resolution. Error Paper Data Toner Save LSU error • Reset the printer by briefly turning the printer off and back on again. • If the error persists, contact a service representative. 7.18 PROBLEM SOLVING