Samsung ML-1250 User Manual (user Manual) (ver.1.00) (English) - Page 40
Manual Feeder, Paper, Source, position. After you finish using the face-up output slot
View all Samsung ML-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Loading Paper 2 Push the output lever down to open the face-up output slot. 3 When you print a document, you must select Manual Feeder for Paper Source from the software application, and then select the correct paper size and type. For details, see page 5.3. 4 Print the document. 5 If you are printing multiple pages, load the next sheet after the first page prints out. 6 Press Demo to start feeding. Notes: • The face-up output slot may not hold the printed pages properly. • The printed pages will not stack in the face-down output tray unless you change output lever position. After you finish using the face-up output slot, you must change the position of the output lever to the normal position. Push it up. 4.6 PRINT MEDIA
P
RINT
M
EDIA
4.
6
Loading Paper
4
Print the document.
3
When you print a document, you must
select
Manual Feeder
for
Paper
Source
from the software application,
and then select the correct paper size
and type. For details, see page
5.3
.
5
If you are printing multiple pages, load
the next sheet after the first page prints
out.
6
Press
Demo
to start feeding.
Notes
:
• The face-up output slot may not hold the printed pages properly.
• The printed pages will not stack in the face-down output tray unless you change output lever
position. After you finish using the face-up output slot, you must change the position of the
output lever to the normal position. Push it up.
2
Push the output lever down to open the
face-up output slot.