Samsung SMX-C20BN User Manual (user Manual) (ver.1.0) (English) - Page 119
Recording, Adjusting the image during recording, Symptom, Explanation/Solution, Beep Sound
UPC - 036725303058
View all Samsung SMX-C20BN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Recording Symptom When recording a subject illuminated by bright light, vertical lines appear. Explanation/Solution • The camcorder is unable to record these levels of brightness. When the screen is exposed to direct sunlight during recording, • Do not leave the camcorder with the LCD screen exposed to the screen turns red or black for an direct sunlight. instant. The beep sound is not heard. • Set the "Beep Sound" to "On." • The beep sound is temporally off while recording videos. • When the Audio/Video cable jack is connected to the camcorder, the beep sound will automatically turn off. There is a time difference between the point where you press Recording start/stop button and the point where the recorded video starts/stops. • On your camcorder, there may be a slight time delay between the point when you press Recording start/stop button and the actual point where the recorded video starts/stops. This is not an error. The recording stops. You cannot record a photo image. • The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a while in a cool place. • Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for about 1 hour in a cool place. • Set your camcorder to Record mode. ²page 19 • Release the lock on the write-protection tab of the memory card if any. • The storage media is full. Use a new memory card or format the storage media. ²page 73 Or remove unnecessary images. ²page 60 Adjusting the image during recording Symptom Explanation/Solution • Set "Focus" to "Auto." ²page 51 Focus does not adjust • The recording conditions are not suitable for auto focus. Adjust the focus manually. ²page 51 automatically. • The lens is dusty on the surface. Clear the lens and check the focus. • Recording is being made in a dark place. Increase the brightness in the place. The image appears too bright or flickering, or changes in color. • This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury lamp. Cancel "iSCENE" to minimize these phenomena. ²page 45 105